License #1034067

(800) 568-8664

What should I do if my Circuit Breaker Keeps Tripping after I Reset It?

By /

If your circuit breaker keeps tripping after a reset, follow these steps to safely diagnose the issue and protect your home:

  1. Unplug all devices: Disconnect every lamp, appliance, and electronic device currently connected to the circuit that tripped.
  2. Reset the breaker: Go to your electrical panel and verify that your hands and the floor are dry. Find the breaker in the middle or “tripped” position. Push it firmly to the OFF position until it clicks, then flip it back to ON.
  3. Test the load: If the breaker stays on with nothing plugged in, the issue was likely an overloaded circuit. Plug your largest appliance back in first, then add other devices one at a time to see if a specific item triggers the trip.
  4. Identify a short circuit: If the breaker trips immediately after a reset even with everything unplugged, you likely have a short circuit. This is a dangerous condition that indicates a wiring fault and requires professional repair.

Warning: Never force a breaker to stay in the “ON” position or tape it in place, as this creates a significant fire hazard. If the breaker continues to trip, it is telling you there is a persistent moisture issue, damaged wiring, or a failing device that must be inspected by a licensed electrician.

Related FAQs